ViseeO Technology Co., Ltd.
By Rio Concepts
Model number: V3 or V4
Blind cornors monitoring system (Screen splitting system) Can be used for any video monitors
System can be designed according to your OEM requirement, 4 blocks splitting is also avaiable
Standard system equipment required:
1. Left camera
2. Right camera
3. Rear view camera
4. The splitter with power control
5. A video monitor
System wiring connecting instruction:
1. Main power from ACC(ignition) 12 - 24V DC available
2. A Wire remote control (Option)
3. Signal (turning) light detecting wires (for automatic screen splitting)
4. Left and right camera power supplies
5. Video inputs for left, right and rear cameras
6. Video output for any video monitor (RCA jack)
How the system acts:
The automatically mode:
- When the car is forwarding, system is not activated
- When left of right turning signal light is on, monitor shows left or right camera captured video images in one complete block on the monitor.
- When driver needs to see both left and right cameras: turn on the turning light right and left or left and right, the screen will be splited into 2 block for 50% left and 50% right cameras till turning light been turned off.
- When driving gear engaged to reverse, the rear camera captured video image will be shown on monitor in one complete block (while turning light are all off)
- While car is reversing and left turning light is on, the screen will show 2/5 left camera on left screen and 3/5 rear camera on right screen.
- While car is reversing and right turning light is on, the screen will show 2/5 right camera on right screen and 3/5 rear camera on left screen.
- While car is reversing and do as point # 3, the screen will be slipted in to 3 block left 25% shows left camera, right 25% shows right camera and 50% below shows rear camera.
The manual mode: (with wired remote control)
All function are the same, except the right and left cameras can be activated by the remote control.
Reverse camera is controlled by the reverse lamp power.
Your own design or function can be added on this system.
You may contact us for any further information about this system by:
eMail address: rio@sensors.name
There are 2 types of side camera required for this system
Model #: VCAM-S01
For SUV or MPV or car with higher position of side rear view mirror, This camera can offer wider viewing angle than 170 degree for viewing both sides of car
Model #: VCAM-D18
For small cars, install this camera on left and right angle of front bumper.
Driver can view both sides of bumper for passing through narrow alley
Copyright 2011 - 2012 Viseeo Technology Co., LTd. All rights reserved.
Web designed by Rio LEE
adding on pages
Products - Screen Splitter / Screen Quardrants Adaptor
